Fluke 1662 Multifunction Tester Price in Bangladesh

Fluke 1662 Multifunction Tester is a rugged and dependable tool built for everyday electrical testing, allowing you to explore the Fluke 1662 Multifunction Tester Price in Bangladesh as a practical solution for installation verification. Designed for professionals, this tester delivers reliable performance with all the essential features required for routine electrical diagnostics.

This multifunction tester provides a comprehensive range of testing capabilities including voltage, frequency, insulation resistance, loop and line impedance, and continuity testing. It also supports RCD testing with automatic sequences, helping electricians perform safety checks efficiently and accurately. These features make it suitable for ensuring compliance with electrical standards in various environments.

The device is known for its simplicity and ease of use. With an intuitive interface and clearly arranged controls, users can quickly access different testing modes without confusion. Its compact design and portable structure make it convenient for on site work, while the included accessories enhance usability for a wide range of testing scenarios.

Durability is one of the key strengths of this tester. Built with high quality materials, it is designed to withstand demanding job site conditions and long term use. The robust construction ensures consistent performance, even in challenging environments where reliability is critical.

In addition to its durability, the tester offers practical features such as polarity checking and fault current calculation, which help users identify potential electrical issues quickly. These capabilities improve efficiency and reduce the time required for troubleshooting and installation verification.

Overall, this multifunction tester is a solid choice for professionals who need a reliable and straightforward testing device. Its combination of essential features, user friendly design, and dependable performance makes it a valuable tool for electrical maintenance, inspection, and installation tasks.

Key Features: Fluke 1662 Multifunction Testers

A solid, reliable, basic installation tester

Tests voltage and frequency
Checks wiring polarity to detect broken N wires
Measures insulation resistance and loop and line resistance
Measures motor windings with continuity test
Calculates prospective earth fault current (PEFC/IK) and prospective short-circuit current (PSC/IK)

Specifications

Specifications: Fluke 1662 Multifunction Testers

AC voltage measurement
Range	500 V
Resolution	0.1 V
Accuracy 45 Hz – 66 Hz	0.8% + 3
Input impedance	360 kΩ
Overload protection	660 V rms
Continuity testing (RLO)
Range (autoranging)	20 Ω / 200 Ω / 2000 Ω
Resolution	0.01 Ω / 0.1 Ω / 1 Ω
Open Circuit Voltage	>4 V
Insulation resistance measurement (RISO)
Accuracy of tTest voltage (at rated test current)	+10%, -0%
Test voltage	100 V 250 V 500 V 1000 V
Insulation resistance range	20 MΩ / 50 MΩ 20 MΩ / 100 MΩ 20 MΩ / 200 MΩ 20 MΩ / 200 MΩ / 500 MΩ 20 MΩ / 200 MΩ / 1000 MΩ
Resolution	0.01 MΩ / 0.1 MΩ 0.01 MΩ / 0.1 MΩ 0.01 MΩ / 0.1 MΩ 0.01 MΩ / 0.1 MΩ / 1 MΩ 0.01 MΩ / 0.1 MΩ / 1 MΩ
Test current	1 mA @ 50 kΩ 1 mA @ 100 kΩ 1 mA @ 250 kΩ 1 mA @ 500 kΩ 1 mA @ 1 MΩ
Loop and line impedance (ZI)
Range	10 Ω / 0.001 Ω / High current mΩ mode
Resolution	0.01 Ω / 0.1 Ω / 1 Ω
Prospective earth fault current, PSC test
Range	1000 A / 10 kA (50 kA)
Resolution	1 A / 0.1 kA
Computation	Prospective earth fault current (PEFC) or Prospective short circuit current (PSC) determined by dividing measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance, respectively.
RCD testing, RCD types tested
RCD Type	A4, AC¹, G², S³
Notes	¹Responds to AC ²General, no delay ³Time delay 4Responds to pulsed signal 5Responds to smooth DC signal
Tripping speed test (ΔT)
Current settings¹	10-30-100-300-500-1000 mA – VAR 10-30-100 mA
Multiplier	x ½, x 1 x 5
Measurement range	RCD Type G	310 ms 50 ms
	RCD Type S	510 ms 160 ms
Notes	¹1000 mA type AC only 700 mA maximum type A in VAR mode VAR mode not available for type B.
RCD/FI-Tripping Current Measurement/Ramp Test (IΔN)
Current range	30% to 110% of RCD rated current¹
Step size	10% of IΔN²
Dwell time	Type G	300 ms/step
	Type S	500 ms/step
Measurement accuracy	±5%
Specified trip current ranges (EN 61008-1)	50% to 100% for Type AC 35% to 140% for Type A (>10 mA) 35% to 200% for Type A (≤10 mA) 50% to 200% for Type B ²5% for Type B
Notes	¹30% to 150% for Type A IΔN > 10 mA 30% to 210% for Type A IΔN = 10 mA 20% to 210% for Type B
Phase Sequence Indication
Icon	Phase Sequence indicator is active.
General Specifications
Size (L x W x H)	10 x 25 x 12.5 cm
Weight (incl. batteries)	1.3 Kg
Battery size, quantity	Type AA, 6 ea.
Sealing	IP-40
Safety	Complies with EN61010-1 Ed 2.0 (2001-02), UL61010, ANSI/ISA –s82.02.01 2000 and CAN/CSA c22.2 No. 1010 2nd edition
Overvoltage	CAT III / 500V; CAT IV 300V
Performance	EN61557-1 to EN61557-7 Second Edition and EN61557-10 Second Edition